Supply ODM China Sterile Grading Hydrophobic PVDF Membrane Filter Cartridge for Water Filter System
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Supply ODM China Sterile Grading Hydrophobic PVDF Membrane Filter Cartridge for Water Filter System, We are honest and open. We look ahead to the stop by and setting up trustworthy and long-term standing romantic relationship.
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for TS Made Sterile Grading Hydrophobic PVDF Pleated Filter, With the highest standards of product quality and service, our goods have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We’re very pleased to serve customers from all over the world!
◆Hydrophobic PVDF membrane for gas and solvents sterile filtration
◆Absolute rating, filtration effective is ≥99.99%, Minimum micron to 0.01um for Air
◆Wide Chemical compatability, low protein binding
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Fermentation air,
•Tank vent;
•Compressed air,
•Sterile filtration of aggressive solvents/gases
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PVDF Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉) Cumulative Time: 50hours |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | DPV | 020-0.2um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F-FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| H-Chemical | 100-1.0um | BN-222/FIN | 30-30″ | V-viton | ||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PDPV045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Supply ODM China Sterile Grading Hydrophobic PVDF Membrane Filter Cartridge for Water Filter System, We are honest and open. We look ahead to the stop by and setting up trustworthy and long-term standing romantic relationship.
TS Made Sterile Grading Hydrophobic PVDF Pleated Filter, With the highest standards of product quality and service, our goods have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We’re very pleased to serve customers from all over the world!
